Everything about Broadcast Domain totally explained
A
broadcast domain is a logical division of a
computer network, in which all
nodes can reach each other by
broadcast at the
data link layer.
In terms of current popular technologies: Any computer connected to the same
Ethernet repeater or
switch is a member of the same broadcast domain. Further, any computer connected to the same set of inter-connected switches/repeaters is a member of the same broadcast domain.
Routers and other
higher-layer devices form boundaries between broadcast domains.
This is as compared to a
collision domain, which would be all nodes on the same set of inter-connected repeaters, divided by switches and learning bridges. Collisions domains are generally smaller than, and contained within, broadcast domains.
Further explanation
The distinction between broadcast and collision domain comes about because simple
Ethernet and similar systems use a shared
transmission system. In simple Ethernet (without switches or
bridges),
data frames are transmitted to all other nodes on a network. Each receiving node checks the destination address of each frame, and simply ignores any frame not addressed to its own
MAC address, or to the
broadcast address. If two nodes transmit at the same time, a
collision results. Repeaters propagate all frames between
network segments, and don't prevent collisions, and thus also propagate collisions between segments. In such a configuration, the broadcast domain is also the collision domain; they're mutually inclusive.
Switches (and their predecessor technology, learning bridges) act as buffers, receiving and analyzing the frames from each connected network segment. Frames destined for nodes connected to the originating segment are not forwarded by the switch. Frames destined for a specific node on a different segment are sent only to that segment. Only broadcast frames are forwarded to all other segments. This reduces unnecessary traffic and collisions.
In such a switched network, transmitted frames may not be received by all other reachable nodes. Nominally, only broadcast frames will be received by all other nodes. Collisions are localized to the network segment they occur on. Thus, the broadcast domain is the entire inter-connected
layer two network, and the segments connected to each switch/bridge port are each a collision domain.
Not all network systems or media feature broadcast/collision domains. For example,
PPP links have neither.
Further Information
Get more info on 'Broadcast Domain'.
|
External Link Exchanges
Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:
<a href="http://broadcast_domain.totallyexplained.com">Broadcast domain Totally Explained</a>
Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned. |
